STRATEGY-CONTROLINDUSTRIAL AUTOMATION SUPPLY
Probe family
3300 XL 8 mm metric probe, M10 × 1 thread, with armor
Nominal system sensitivity
7.87 V/mm (200 mV/mil)
Dimensions (W × H × D)
Probe assembly — see ordering code
Weight
Confirm for supplied probe
SC SOURCING BRIEFBENTLY NEVADA · 3300 XL Proximity Transducer / Probe

330104-13-06-10-02-00

3300 XL 8 mm Metric Proximity Probe with Armor

3300 XL 8 mm Metric Proximity Probe with Armor for non-contact shaft vibration and position measurement on rotating machinery, with the exact part number, rack configuration and hardware compatibility checked before supply.

BRANDBently Nevada
STOCK CONFIRMATIONLead time: 2–3 days
CONDITIONBrand new and original
WARRANTY12 months
Check stock & price Send part number

Product overview

The Bently Nevada 330104-13-06-10-02-00 is a 3300 XL 8 mm Metric Proximity Probe with Armor used for non-contact shaft vibration and position measurement on rotating machinery. It is commonly applied in radial vibration monitoring and shaft axial-position measurement.

Selection must follow the complete part number and installed-system configuration. Before ordering, confirm thread and physical length configuration, probe plus extension-cable total length, matching proximitor sensor and approval requirement.

COMMON APPLICATIONS

Installed-system context

  • Radial vibration monitoring
  • Shaft axial-position measurement
  • Turbine and compressor protection

Tell us the controller, communication network and installed panel details. That context helps prevent a visually similar but incompatible replacement.

BENTLY NEVADA MODEL CODE

Model number breakdown

Read the complete ordering code from left to right. Every group matters when matching an installed system or preparing a spare.

330104
3300 XL 8 mm metric probe with M10 × 1 thread and stainless-steel armor
13
Unthreaded-length code: 130 mm, based on the metric probe ordering-code position
06
Overall case-length code: 60 mm; because this combination conflicts with the normal geometry rule, confirm the physical nameplate and OEM order record before replacement
10
Total probe length: 1.0 metre
02
Miniature coaxial ClickLoc connector with standard cable
00
No hazardous-area agency approval option

VERIFIED MODEL DATA

Technical specifications

Manufacturer
Bently Nevada (Baker Hughes)
Model / part number
330104-13-06-10-02-00
Product name
3300 XL 8 mm Metric Proximity Probe with Armor
Probe family
3300 XL 8 mm metric probe, M10 × 1 thread, with armor
Nominal system sensitivity
7.87 V/mm (200 mV/mil)
Total probe length
1.0 m
Connector / cable
Miniature coaxial ClickLoc connector, standard cable
Agency approval
Not required (code 00)
System requirement
Match probe and extension-cable lengths to the selected Proximitor Sensor system length

Technical values are compiled from official Bently Nevada product documentation for this exact article number. Always check the delivered unit nameplate and revision before installation.

What to send for verification

  • • Complete part number and nameplate
  • • thread and physical length configuration
  • • probe plus extension-cable total length
  • • matching Proximitor Sensor and approval requirement
  • • Required condition, quantity and destination country

What your quotation will state

  • • Exact quoted article number
  • • New, surplus or refurbished condition
  • • Available quantity and estimated lead time
  • • Warranty and proposed shipping method

Availability, condition, revision and exact installed-system compatibility are confirmed in writing before supply.

BUYER QUESTIONS

Frequently asked questions

What is the Bently Nevada 330104-13-06-10-02-00?

It is a 3300 XL 8 mm Metric Proximity Probe with Armor used for non-contact shaft vibration and position measurement on rotating machinery.

What should be checked before ordering?

Confirm the full part number, then verify thread and physical length configuration, probe plus extension-cable total length, matching proximitor sensor and approval requirement.

Can a visually similar 3500 module or transducer be used instead?

Do not select by appearance alone. The monitor family, companion module or transducer, rack configuration, signal type and hardware revision must match the installed system.

What information is needed for a quotation?

Send the complete part number, quantity, required condition, destination and clear nameplate or rack-BOM photos.

RELATED BENTLY NEVADA AUTOMATION PARTS

3500/22M 288055-01Standard Transient Data Interface Module330130-040-02-CN3300 XL 4.0 m Extension Cable125680-01Proximitor I/O Module with Internal Terminations

REQUEST A QUOTATION

Check price and availability

All fields are optional. Your country is identified automatically when you submit the enquiry.

Qingtian Building, North of Xusong East 5th Street, Tongzhou District, Beijing, China