Six-Channel Process Variable Monitor for monitoring proportional process-variable signals in a 3500 rack, with the exact part number, rack configuration and hardware compatibility checked before supply.
The Bently Nevada 3500/62 163179-03 is a Six-Channel Process Variable Monitor used for monitoring proportional process-variable signals in a 3500 rack. It is commonly applied in pressure, flow, temperature and level monitoring and process-signal alarming.
Selection must follow the complete part number and installed-system configuration. Before ordering, confirm input signal and companion i/o type, alarm and setpoint configuration, rack firmware and module revision.
COMMON APPLICATIONS
Tell us the controller, communication network and installed panel details. That context helps prevent a visually similar but incompatible replacement.
DATASHEET BUYER GUIDE
The 163179-03 front monitor is common across the family. The correct complete assembly depends on the field signal, termination location, isolation or intrinsic-safety requirement, and site approval. Use this guide to narrow the configuration before sending the rack BOM or nameplate photo.
Front monitor P/N 163179-03FRONT-PANEL STATUS
OKMonitor is operating correctly
TX/RXMonitor is communicating with other modules in the 3500 rack
BYPASSOne or more process-variable channels are in bypass mode
INPUT AND I/O SELECTION
Voltage-output transmitters and proportional process signals. Minimum configured input span is 2 V.
Current loops where galvanic isolation from the rack input is required.
Intrinsically safe field-transmitter loops requiring the dedicated internal-barrier I/O and external 24 Vdc supply.
SIGNAL AND ALARM PERFORMANCE
ENVIRONMENTAL LIMITS
BEFORE YOU ORDER
Source: Baker Hughes 3500/62 Process Variable Monitor Datasheet 141541 Rev. R. Final configuration must be checked against the installed rack, field wiring and applicable site approvals.
BENTLY NEVADA MODEL CODE
Read the complete ordering code from left to right. Every group matters when matching an installed system or preparing a spare.
VERIFIED MODEL DATA
Technical values are compiled from official Bently Nevada product documentation for this exact article number. Always check the delivered unit nameplate and revision before installation.
Availability, condition, revision and exact installed-system compatibility are confirmed in writing before supply.
BUYER QUESTIONS
It is a Six-Channel Process Variable Monitor used for monitoring proportional process-variable signals in a 3500 rack.
Confirm the full part number, then verify input signal and companion i/o type, alarm and setpoint configuration, rack firmware and module revision.
Do not select by appearance alone. The monitor family, companion module or transducer, rack configuration, signal type and hardware revision must match the installed system.
Send the complete part number, quantity, required condition, destination and clear nameplate or rack-BOM photos.
FRONT AND REAR CARD COMBINATIONS
Use the complete ordering code to match the required rear I/O interface and certification. The front-card part number identifies the monitor or control module; the rear-card part number identifies the I/O, termination and signal arrangement.
| Complete order code | Front card P/N | Rear card P/N | Rear I/O configuration | Certification option |
|---|---|---|---|---|
| 3500/62-01-00 | 163179-03 | 136491-01 | −10 to +10 Vdc, internal terminations | No agency approval option |
| 3500/62-01-01 | 163179-03 | 136491-01 | −10 to +10 Vdc, internal terminations | cNRTLus / CSA/NRTL/C |
| 3500/62-01-02 | 163179-03 | 136491-01 | −10 to +10 Vdc, internal terminations | ATEX / IECEx / CSA (Class I, Zone 2) |
| 3500/62-02-00 | 163179-03 | 136499-01 | −10 to +10 Vdc, external terminations | No agency approval option |
| 3500/62-02-01 | 163179-03 | 136499-01 | −10 to +10 Vdc, external terminations | cNRTLus |
| 3500/62-03-00 | 163179-03 | 136294-01 | Isolated +4 to +20 mA, internal terminations | No agency approval option |
| 3500/62-03-01 | 163179-03 | 136294-01 | Isolated +4 to +20 mA, internal terminations | cNRTLus |
| 3500/62-04-00 | 163179-03 | 136483-01 | Isolated +4 to +20 mA, external terminations | No agency approval option |
| 3500/62-04-01 | 163179-03 | 136483-01 | Isolated +4 to +20 mA, external terminations | cNRTLus |
| 3500/62-05-00 | 163179-03 | 137110-01 | Non-isolated +4 to +20 mA with internal barriers | No agency approval option |
| 3500/62-05-01 | 163179-03 | 137110-01 | Non-isolated +4 to +20 mA with internal barriers | cNRTLus / CSA/NRTL/C |
| 3500/62-05-02 | 163179-03 | 137110-01 | Non-isolated +4 to +20 mA with internal barriers | ATEX / IECEx / CSA (Class I, Zone 2) |
Confirm the installed rear I/O card, connection medium and required site approvals before ordering. A matching front-card number alone does not define the complete assembly.
RELATED BENTLY NEVADA AUTOMATION PARTS
REQUEST A QUOTATION
All fields are optional. Your country is identified automatically when you submit the enquiry.
Qingtian Building, North of Xusong East 5th Street, Tongzhou District, Beijing, China
